Two Component PU Adhesive for Automotive Exterior/Interior Trim Parts
Beijing Comens New Materials Co., Ltd.- Type：PU Adhesive
- Material：Polyurethane
- Bonding Faction：Bonding of Composite Materials
- Application：Automobile
- Curing Mechanism：Poly Reaction
- Color After Mixing：Black
Base Info
- Model NO.：Flexibond 8101,8102
- Density (Polyol)：1.25 G,Cm^3
- Density (Isocyanate)：1.65 G,Cm^3
- Mix Ratio (by Volume)：1:1
- Application Time (FC)：3-5mins
- Application Time (a)：5-10mins
- Application Time (C)：20-30mins
- Application Time (D)：30-50mins
- Initial Curing Time (FC)：8-13mins
- Initial Curing Time (a)：20-30mins
- Initial Curing Time (C)：50-80mins
- Initial Curing Time (D)：2.5-3.5hrs
- Transport Package：Pallet,Box
- Specification：300ml a+300ml B Twin Plastic Cartridge
- Trademark：Flexibond
- Origin：China
- HS Code：3506100090
- Production Capacity：30000 Tons,Year
Description
≥13Mpa (Aluminum alloy)Shelf life (unopened below 25ºC) 12months 12months
Application Note:
The substrates should be clean and dry and of no grease, dust, or other contaminations. The substrates can be cleaned by alcohol or acetone. Polish is recommended if with aluminum and other difficult adhesion materials.
Cleaning:
Recommended Cleaner: Acetone, butanone.
Specification:
Flexibond 8100A: 20kg/drum, Flexibond 8100B: 20kg/drum. The package could be adjust according to the customer's need.
(310ml+310ml) A&B jointed cartridge.
Partners:
Company Profile:
Production Base:
Automatic Production Lines and Quality Assurance:
Global Sales Network:
Certificates:
COMENS,A FULL RANGE OF SOLUTIONS
FOR MULTIPLE INDUSTRIES
Application Note:
The substrates should be clean and dry and of no grease, dust, or other contaminations. The substrates can be cleaned by alcohol or acetone. Polish is recommended if with aluminum and other difficult adhesion materials.
- Put the cartridge into the manual or pneumatic applicator gun.
- Remove the stopper at the top the cartridge, and screw the extrusion-type nozzle, and then cut the nozzle into a suitable shape and size according to your need.
- Start the applicator gun and give up the sealant for the first 20cm, then apply to the substrates or the place for sealing.
- Substrates have been coated with adhesive should be pressed within application time, ensure the fully coating of substrate, or the adhesion strength will be affected. Two or more workers are recommended
- Replace with new nozzle If stop extrusion more than application time, make sure smooth processing
- After application, put back the stopper with the left sealants, screw tight, sealing well
- Must use with primer before application
Cleaning:
Recommended Cleaner: Acetone, butanone.
Specification:
Flexibond 8100A: 20kg/drum, Flexibond 8100B: 20kg/drum. The package could be adjust according to the customer's need.
(310ml+310ml) A&B jointed cartridge.
Partners:
Company Profile:
Production Base:
Automatic Production Lines and Quality Assurance:
Global Sales Network:
Certificates:
COMENS,A FULL RANGE OF SOLUTIONS
FOR MULTIPLE INDUSTRIES