How to apply film to rearview mirror

How to apply film to rearview mirror? Detailed steps and precautions

Rearview mirror film not only protects the mirror from scratches, but also reduces glare and improves driving safety. This article will introduce you to the steps, tool preparation and FAQs of applying rearview mirror film in detail, and attach data on recent hot topics for reference.

1. Preparation of tools and materials

2. Operation steps

1.Clean rearview mirror: Wipe the mirror surface thoroughly with a cleaning cloth to ensure it is free of dust and oil stains.

2.Measure and cut: Cover the film on the rearview mirror, use a utility knife to cut along the edge, leaving about 2mm margin.

3.Spray soapy water: Spray soapy water on the mirror surface and the back of the film to facilitate position adjustment.

4.Sticky film: Slowly apply it from one side, and use a scraper to smooth it from the center to the edge to eliminate air bubbles.

5.Trim edges: Use a utility knife to cut off the excess and make sure the edges are flat.

3. Frequently Asked Questions

4. Reference of recent hot topics (last 10 days)

5. Things to note

1. The construction environment must be kept dust-free and avoid direct sunlight.

2. If the film covering area is large, it is recommended that two people work together to complete it.

3. Avoid exposure to rain or high-pressure water gun cleaning within 24 hours after completion.

4. Check the edges of the film regularly to prevent water from falling off.

Through the above steps, you can easily complete the rearview mirror film. If you want to learn more about car maintenance, you can pay attention to the technical discussions in recent hot topics. Reasonable use of the film can not only extend the life of the rearview mirror, but also add points to driving safety!